The independent heating and cooling company across the Willamette Valley and northwest Oregon
High-Efficiency Upgrade
A high-efficiency furnace upgrade replaces an older gas furnace with a modern condensing model, and we do this work for homeowners across Oregon and Washington. Most people call us when an aging furnace needs repair again, runs loud, heats unevenly, or short cycles through a cold snap. The job is more than a swap. Venting, gas sizing, condensate drainage and ductwork all change with a condensing furnace. Call us and we will look at the existing system, measure what your home actually needs, and lay out the options in plain language.
Call (888) 365-6280- You reach a person, not a menu
- Open every day
- The quote comes first, in writing
Taking calls until 5:00 PM PT
What the upgrade actually involves
A condensing furnace pulls more heat out of the same fuel, which means it vents cooler exhaust through PVC out a sidewall instead of up the old chimney flue. That change drives most of the work. We remove the old unit, run new intake and exhaust piping, set up a condensate drain with a trap and often a pump, and confirm the gas line and electrical supply suit the new equipment. If the old flue also served a water heater, we sort that out too rather than leaving it orphaned.
What we check and install
Before we quote anything we do a load calculation, because the replacement is often smaller than what came out. Oversized furnaces short cycle and leave rooms uneven. We look at duct sizing, return air, static pressure, filter location and register placement. Many homes across the region get a wider filter cabinet at the same time, which matters during smoke season. We install the furnace, new venting and drainage, a thermostat that matches the equipment's staging, then commission it and check temperature rise and gas pressure.
How we decide it is the right call
Age, repair history and comfort complaints usually settle it. A furnace past its second decade with a cracked component or a failed heat exchanger is a replacement conversation, not a heating repair conversation. If your furnace is younger and the problem is one part, we say so and fix it. We also look at whether venting can be rerouted and whether the ductwork can carry the airflow. Sometimes a heat pump paired with a furnace makes more sense here, and we will tell you when that is true.
x
Other furnace installation work
What you get on every job
You approve a written quote first
Covering 162 cities across Oregon, Washington.Phones answered by people
Open 7 days, 8:00 AM to 5:00 PM PT.Every major brand, gas and electric
Carrier, Trane, Lennox, Goodman and more. We are not an authorized dealer for any of them.High-Efficiency Upgrade — quick answers
Do I have to give up my chimney flue?
For a condensing furnace, yes. Exhaust is cool enough for PVC and vents through a sidewall. If a gas water heater shared that chimney, we address its venting as part of the same job.
Will a high-efficiency furnace fix cold rooms?
Sometimes, but ductwork is usually the cause. We measure airflow and static pressure before installing, so uneven rooms get addressed with duct changes rather than blamed on the old equipment.
Can I keep my existing thermostat?
Often not. Multi-stage and variable-speed furnaces need a thermostat that can talk to the staging, otherwise you lose the comfort you paid for. We include a matched control in the plan.
How it works
- Step 1
Tell us the symptom
Call or fill in the quote form. Describe the noise, the smell, the temperature, and when it started. That detail helps us bring the right parts and gives you an honest idea of the visit ahead.
- Step 2
We diagnose on site
A technician checks the thermostat, airflow, electrical connections, refrigerant behaviour and the outdoor unit. We tell you what failed and why, in plain language, before anyone reaches for a part or a price.
- Step 3
You choose the repair
We lay out the fix, any parts on order, and what happens if you wait. Once you agree, we do the work and confirm the system holds temperature before we pack up and leave.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- Heat pumps are our normalIn this region heat pumps outnumber furnaces, so defrost boards, reversing valves and short cycling in wet weather are everyday work for us. We know how these systems behave in a cold December rain, not just on a test bench.
- Wet winter defrost problemsIce on the outdoor coil, a unit that runs and runs without warming the house, puddles that refreeze under the pad. We trace whether it is a sensor, a stuck valve, drainage, or airflow, then fix the actual cause.
- Filtration after smoke seasonWildfire smoke turned indoor air quality into a real conversation here. We look at filter fit, return sizing and IAQ options that your blower can actually push air through, rather than choking the system with the wrong media.
- We explain before we chargeYou get the diagnosis, the options and the trade-offs before work starts. If a repair is not worth it on an old system, we say so. No pressure, no jargon dumped on you at the door.
- All major brands, gas & electricOne independent crew for Carrier, Trane, Lennox, Goodman, Rheem and more.
- Straight answersNot worth fixing? We say that out loud, and often it saves you the visit fee.
High-Efficiency Upgrade
Ready to book high-efficiency upgrade?
Describe the system and your ZIP. The written quote comes before any work.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →