The independent heating and cooling company across the Willamette Valley and northwest Oregon
Furnace Repair — Book a Visit Today
We handle furnace repair and heating repair for homeowners across Oregon and Washington, from a furnace that quit overnight to one that keeps short cycling. Most calls come down to a few families of failure: a cracked or dirty flame sensor, a worn ignitor, a clogged filter choking airflow, a failed blower motor or capacitor, a limit switch tripping on heat buildup, or a thermostat that lost its signal. A visit starts with what you noticed and when, then we check the thermostat call, look at airflow and the filter, read the control board or blink codes, and test the ignition sequence. You get told what failed, what it takes to fix, and what can wait. Call us and describe the noise or the smell and we will bring the likely part.
Call (888) 365-6280- You reach a person, not a menu
- Open every day
- The quote comes first, in writing
Taking calls until 5:00 PM PT
The furnace symptoms we hear most
- The furnace blows but the air is cold Ignition failure, flame sensor, or gas valve not opening
- It starts, runs a minute, then shuts off again Short cycling from dirty flame sensor, restricted airflow, or a tripping limit switch
- Nothing happens at all when I turn up the heat Thermostat, tripped breaker, blown control board fuse, or door switch
- There is a loud boom or bang when it lights Delayed ignition from a weak ignitor or fouled burners
- Some rooms are freezing and others are fine Airflow and duct problems, closed or blocked vents, or a struggling blower
People call this furnace repair, heating repair or heater repair. Same visit, same written quote, same technician.
Safe things to check first
Worth a look before you call — sometimes it saves you the visit.
- 1check that the thermostat is set to Heat with a temperature above the room reading, and swap in fresh batteries if the screen is dim or blank
- 2open the electrical panel door and look for a tripped breaker labeled furnace, air handler, or HVAC, and reset it once
- 3pull the filter and hold it up to a light, then replace it if you cannot see through it
- 4walk the house and confirm supply and return vents are open and not blocked by furniture or rugs
How we compare to other HVAC companies
| Willamette Heat & Cool | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| Written quote before any work | ✓ | ✕ | ✕ |
| Live answer seven days a week | ✓ | ✕ | ✓ |
| All major brands, gas and electric | ✓ | ✓ | ✕ |
| No manufacturer targets to hit | ✓ | ✕ | ✓ |
| Crews familiar with homes like yours | ✓ | ✕ | ✓ |
What you get on every job
You approve a written quote first
Covering 162 cities across Oregon, Washington.Phones answered by people
Open 7 days, 8:00 AM to 5:00 PM PT.Every major brand, gas and electric
Carrier, Trane, Lennox, Goodman and more. We are not an authorized dealer for any of them.Furnace Repair — quick answers
My furnace smells like gas. What do I do?
Leave the building right away, take everyone with you, and do not flip switches. From outside, call 911 or your gas utility. Once they have cleared the home, call us and we will inspect the furnace, burners, and gas connections.
Is it worth repairing an older furnace?
Often yes. Ignitors, flame sensors, capacitors, and blower motors are normal wear parts and replacing one can carry a furnace for years. We tell you what failed, whether other components are near the end, and let you decide.
Why does my furnace keep shutting off before the house warms up?
Short cycling usually traces to restricted airflow or a sensor problem. A clogged filter, closed vents, a dirty flame sensor, or a limit switch tripping on heat buildup all cause it. Change the filter first, then call for heater repair.
Can you work on electric furnaces too?
Yes. Electric furnace repair usually involves heating elements, sequencers, contactors, or the blower. We test each stage under load to find which element or control failed rather than replacing parts on a guess.
How fast can you get out for no heat?
We prioritize no-heat calls, especially for households with infants, older adults, or anyone with health concerns. Call and describe what the furnace is doing and we will give you a realistic window and what to do while you wait.
What is a flame sensor and why does it fail so often?
It is a thin metal rod that proves flame is present so the gas valve stays open. Combustion residue coats it over time, the signal weakens, and the furnace shuts down as a safety response. Cleaning or replacing it is a common repair.
How it works
- Step 1
Tell us the symptom
Call or fill in the quote form. Describe the noise, the smell, the temperature, and when it started. That detail helps us bring the right parts and gives you an honest idea of the visit ahead.
- Step 2
We diagnose on site
A technician checks the thermostat, airflow, electrical connections, refrigerant behaviour and the outdoor unit. We tell you what failed and why, in plain language, before anyone reaches for a part or a price.
- Step 3
You choose the repair
We lay out the fix, any parts on order, and what happens if you wait. Once you agree, we do the work and confirm the system holds temperature before we pack up and leave.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- Heat pumps are our normalIn this region heat pumps outnumber furnaces, so defrost boards, reversing valves and short cycling in wet weather are everyday work for us. We know how these systems behave in a cold December rain, not just on a test bench.
- Wet winter defrost problemsIce on the outdoor coil, a unit that runs and runs without warming the house, puddles that refreeze under the pad. We trace whether it is a sensor, a stuck valve, drainage, or airflow, then fix the actual cause.
- Filtration after smoke seasonWildfire smoke turned indoor air quality into a real conversation here. We look at filter fit, return sizing and IAQ options that your blower can actually push air through, rather than choking the system with the wrong media.
- We explain before we chargeYou get the diagnosis, the options and the trade-offs before work starts. If a repair is not worth it on an old system, we say so. No pressure, no jargon dumped on you at the door.
- All major brands, gas & electricOne independent crew for Carrier, Trane, Lennox, Goodman, Rheem and more.
- Straight answersNot worth fixing? We say that out loud, and often it saves you the visit fee.
Furnace Repair
Small faults become big ones on a schedule of their own
Describe the symptoms and we'll book the visit — takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →