The independent heating and cooling company across the Willamette Valley and northwest Oregon

Furnace Repair in Boring, OR — Book a Visit Today

Cold air from the registers, a burner that lights and drops out, or a blower that runs without heat all point to the same thing. We do furnace repair in Boring for gas and electric systems, and we start by asking what changed and when. If you ever smell gas or your carbon monoxide alarm sounds, leave the house first, then call 911 or the gas utility from outside, and call us after that. Otherwise the safe checks are simple: thermostat batteries, the breaker, a fresh filter. Reach us by phone or send the symptoms through the quote form.

Call (888) 365-6280

You reach a person, not a menu
Open every day
The quote comes first, in writing

Taking calls until 5:00 PM PT

Furnace Repair technician working in Boring, OR

Every major brand, one numberCarrier Trane Lennox Goodman Rheem York American Standard Bryant

Common furnace faults in Boring homes

The furnace blows but the air is cold Ignition failure, flame sensor, or gas valve not opening
It starts, runs a minute, then shuts off again Short cycling from dirty flame sensor, restricted airflow, or a tripping limit switch
Nothing happens at all when I turn up the heat Thermostat, tripped breaker, blown control board fuse, or door switch
There is a loud boom or bang when it lights Delayed ignition from a weak ignitor or fouled burners
Some rooms are freezing and others are fine Airflow and duct problems, closed or blocked vents, or a struggling blower

Whether you call it furnace repair, heating repair or heater repair, the work is identical and so is the quote you approve first.

Boring coverage

From Boring we also cover Sandy, Damascus, Gresham, Estacada, Happy Valley, Eagle Creek and Clackamas.

Other repairs we do in Boring

furnace repair across the region → · Every system we fix in Boring →

Guides & troubleshooting

How we compare to other HVAC companies in Boring

	Willamette Heat & Cool	Big-box repair chains	Handyman listings
Written quote before any work	✓	✕	✕
Live answer seven days a week	✓	✕	✓
All major brands, gas and electric	✓	✓	✕
No manufacturer targets to hit	✓	✕	✓
Crews familiar with homes like yours	✓	✕	✓

Call (888) 365-6280

What you get on every job

You approve a written quote first

Covering 162 cities across Oregon, Washington.

Phones answered by people

Open 7 days, 8:00 AM to 5:00 PM PT.

Every major brand, gas and electric

Carrier, Trane, Lennox, Goodman and more. We are not an authorized dealer for any of them.

Furnace Repair in Boring — quick answers

My furnace smells like gas. What do I do?

Leave the building right away, take everyone with you, and do not flip switches. From outside, call 911 or your gas utility. Once they have cleared the home, call us and we will inspect the furnace, burners, and gas connections.

Is it worth repairing an older furnace?

Often yes. Ignitors, flame sensors, capacitors, and blower motors are normal wear parts and replacing one can carry a furnace for years. We tell you what failed, whether other components are near the end, and let you decide.

Why does my furnace keep shutting off before the house warms up?

Short cycling usually traces to restricted airflow or a sensor problem. A clogged filter, closed vents, a dirty flame sensor, or a limit switch tripping on heat buildup all cause it. Change the filter first, then call for heater repair.

Can you work on electric furnaces too?

Yes. Electric furnace repair usually involves heating elements, sequencers, contactors, or the blower. We test each stage under load to find which element or control failed rather than replacing parts on a guess.

How soon can you get to a home in Boring?

Call us and we will give you a real window rather than a guess. Boring is close to our regular routes, so same-week scheduling is normal for maintenance and tune-ups. No-heat and no-cool calls get moved up, and during the first hard cold snap or the first stretch of high heat we work through the backlog in the order the calls come in. Telling us the make of the system and what it is doing helps us bring the right parts.

How it works

Step 1
Tell us the symptom
Call or fill in the quote form. Describe the noise, the smell, the temperature, and when it started. That detail helps us bring the right parts and gives you an honest idea of the visit ahead.
Step 2
We diagnose on site
A technician checks the thermostat, airflow, electrical connections, refrigerant behaviour and the outdoor unit. We tell you what failed and why, in plain language, before anyone reaches for a part or a price.
Step 3
You choose the repair
We lay out the fix, any parts on order, and what happens if you wait. Once you agree, we do the work and confirm the system holds temperature before we pack up and leave.

Call (888) 365-6280

A real person answers
Open 7 days
Written quote before work starts

Why homeowners call us

Heat pumps are our normalIn this region heat pumps outnumber furnaces, so defrost boards, reversing valves and short cycling in wet weather are everyday work for us. We know how these systems behave in a cold December rain, not just on a test bench.
Wet winter defrost problemsIce on the outdoor coil, a unit that runs and runs without warming the house, puddles that refreeze under the pad. We trace whether it is a sensor, a stuck valve, drainage, or airflow, then fix the actual cause.
Filtration after smoke seasonWildfire smoke turned indoor air quality into a real conversation here. We look at filter fit, return sizing and IAQ options that your blower can actually push air through, rather than choking the system with the wrong media.
We explain before we chargeYou get the diagnosis, the options and the trade-offs before work starts. If a repair is not worth it on an old system, we say so. No pressure, no jargon dumped on you at the door.
All major brands, gas & electricOne independent crew for Carrier, Trane, Lennox, Goodman, Rheem and more.
Straight answersNot worth fixing? We say that out loud, and often it saves you the visit fee.